8
user manual LokPilot V2.0 / LokPilot DCC V2.0 01/2005
Settings for analogue mode
With the aid of CVs 125 and 126 you can adjust the
starting and maximum speed for analogue DC-
operation. In analogue AC operation CVs 127 and
128 are responsible (not for LokPilotDCC V2.0). Thus
you can adjust the various speed settings even in
analogue operation.
LGB-control
When using LGB-command stations or the Roco Lok-
maus I the LokPilot V2.0 can be set to pulse control.
Set bit 5 in CV 49 for this purpose. Subsequently the
decoder counts the number of times the F1 button is
pressed in sequence in order to be activated the desired
function. Thus you can trigger all available functions
by pressing the F1 button the appropriate number of
times.
Brake sections
The LokPilot V2.0 decoder supports the most
commonly used brake systems:
• Lenz-Brake generator in DCC-mode
• Märklin® Brake section (not LokPilotDCC V2.0)
As soon as a brake command is recognised the LokPilot
V2.0 decoder slows down the engine with the
deceleration set in CV 4. After the enforced stop the
engine accelerates as per the setting in CV 3. In order
to active this feature certain settings have to be ente-
red in CV 51.
Lenz Brake generator
The Lenz LG100 works in compliance with the
mechanisms described by the NMRA and is fully
supported by the LokPilot V2.0 decoder. Write value
8 in CV 51.
Märklin®-Brake section
In principle the Märklin®-Bake section applies DC to
the track instead of the digital signals. In order to
activate this mode the value 1 has to be written in CV
51. The Märklin®-Brake section and the analogue DC
operation should never be active at the same time,
because the DC supply of the Märklin® Brake section
could be interpreted as analogue DC-mode. Turn off
the analogue mode in CV 50 to avoid this. The Märklin
Brake section is not available for the LokPilotDCC V2.0.
Support and Assistance
Your first port of call with any questions is the dealer
where you purchased the LokPilot V2.0 decoder. He
is your competent partner for all your questions related
to the model train hobby.
You may also contact us directly. For enquiries please
use either email or fax (don’t forget to provide your
own fax-no.) and we will reply within a few days.
Please call our hotline only in case of complex
enquiries that can’t be dealt with by email or fax.
The hotline is often very busy and you may
encounter delays. Also check our website for more
information. You will find many hints under „Sup-
port / FAQ“ and even feed back from other users.
Of course we will be pleased to assist you. You can
contact us at:
By telephone: ++49 (0)700 – LOKSOUND
++49 (0)700 – 56576863
Tuesdays:
from 10.00 am to 12.00 noon
Wednesdays:
from 10.00 am to 12.00 noon
Per Fax:
++49 (0)700 - 37872538
Per email:
Per mail:
ESU electronic solutions ulm GmbH
- Technical Support -
Industriestraße 5/2
D-89081 Ulm
Internet: http://www.loksound.de
