2
INSTALLATION REQUIREMENTS
Tools and Parts
Gather the required tools and parts before starting installation.
The parts supplied are in the washer basket.
Parts needed (not provided with washer):
To order:
■
Call the dealer from whom you purchased your washer.
■
Reference the toll-free number on the front page of the
Washer User Instructions.
■
Visit the website on the front page of the Washer User
Instructions.
NOTE: Replace inlet hoses after 5 years of use to reduce the risk
of hose failure. Record hose installation or replacement dates for
future reference.
Parts supplied:
Tools needed for installation:
Alternate Parts
Your installation may require additional parts. For information on
ordering, please refer to the toll-free phone numbers on the front
page of the Washer User Instructions.
■
Inlet hoses
■
Flat washers
A. Beaded tie strap
B. Front leveling feet with nuts (2)
C. Drain hose form
■
Adjustable or open end
wrench
⁹⁄₁₆
" (14 mm)
■
Level
■
Wood block
■
Ruler or measuring tape
■
Pliers that open to 1
⁹⁄₁₆
"
(3.95 cm)
■
Flashlight (optional)
A
B
C
If You Have:
You Will Need to Buy:
Laundry tub or
standpipe taller
than 96" (2.4 m)
Sump pump system (if not already
available)
1" (2.5 cm)
diameter
standpipe
1
¹⁄₄
" (3.2 cm) diameter to 1" (2.5 cm)
diameter standpipe adapter,
Part Number 280130
Overhead sewer
Standard 20 gal. (76 L) 39" (99 cm) tall
drain tub or utility sink, sump pump and
connectors (available from local
plumbing suppliers)
Floor drain
Siphon break kit, Part Number 280129;
additional drain hose,
Part Number 3357090
Water faucets
beyond reach of fill
hoses
2 longer water fill hoses:
6 ft (1.8 m) Part Number 76314,
10 ft (3.0 m) Part Number 350008
Drain hose too
short
Kit Part Number 280131
Lint clogged drain
Drain protector, Part Number 367031
