Estate Swing E-SC 400, Instruction Manual

Page: 22 / 37

E-SC 400 / 402 Classic Series Instruction Manual
3.3
For Your Convenience
The green terminal strips on the control board are easily removed for wiring. Simply pull straight out on the
terminal strip to remove it from the board. It will slide right offi. Slide it back on when you are finished with
your wiring connections.
Be sure you are placing your wires in the terminal block correctly.
!
Take the terminal block offi of the control board to insert
wires. Hold with screw terminals facing upward.
Turn the screw counter - clockwise to open the terminal
and clockwise to close the terminal.
The terminals come closed. Be sure not to mistake this
for open and insert the wires below the terminal clamp.
This will lack the conductivity to complete the circuit.