The ESTATE SLIDE operator is supplied with a magnetic limit switch and bracket to be secured
to the top of the rack, this commands gate movement to stop in the open position.
1. Move the gate to the open position.
2. Attach the plate, as shown below (A), to the rack.
3. Be sure it is lined up with the magnet, as shown below (B), on the side of the operator. The
red limit light should come on when the magnet is lined up.
4. After the magnet is lined up, move the gate open for programming.
The open stop point will be learned by programming later in the manual
Travel Limit Installation for OPEN position
(A)
Red part is magnet, face
toward the operator.
Sliver part is attached to
top of rack.
(B)
This is the limit detector, this should line up with the red
magnet (A) in the OPEN position.
11
