5
ASSEMBLY
ALWAYS
make sure the
unit is
unplugged
before beginning
assembly! NEVER
move or
clean the heater, or change the bulb, while it is
plugged in.
ALWAYS
attach the feet before using!
NEVER
plug in or operate this unit if the feet are not
securely attached!
i
i
STEP 1:
Carefully turn the
Stove(A)
upside down and lay it on a clean soft surface.
STEP 2:
Align the holes in the
Leg(B
) with the holes in the corner of the stove frame as shown.
STEP 3:
Thread three
Screws(C)
through the holes in the leg and into the stove frame.
STEP 4:
Partially tighten the screws with a Phillips screwdriver. Repeat Steps 2 and 3 for the
other three
Legs(B
).
STEP 5:
Check the alignment and tighten all.
Screws(C)
Stove(A)
Legs(B)
