Essilor Instruments Vision-R 800, User Manual

Page: 82 / 91

4. The equipment or system should not be used next to or placed on top of another device. If use in the
vicinity of another device or with the device installed on top of another device is required, it must be
checked for proper operation in the exact configuration where it will be used.
5. Essential performances : Product integrity is as described on the leaflet after immunity tests. The
device is designed according to ISO 10341
6. Appliance shall fulfill these essential performances for all Immunity tests (ESD, Radiated RF
disturbance, Fast transient, Surge, Conducted RF disturbance, Magnetic field).
Manufacturer guidelines and declaration - Electromagnetic emissions
Vision-R TM 800 is intended to be used in the electromagnetic environment specified below.
It is up to the customer or the user to verify that the instrument is used in this environment.
Emissions test Compliance Electromagnetic environment – Guidelines
RF emissions CISPR 11 Group 1
Vision-R TM 800 uses RF energy only for its internal
functions.
Therefore, its RF emissions are very low and are not
likely to generate any interference in nearby
electronic equipment.
RF emissions CISPR 11 Class B
Vision-R TM 800 can be used in all sites, including
domestic sites and those that are directly connected
to the public low-voltage power supply network that
supplies private residential buildings.
Harmonic emissions
IEC 61000-3-2
Class A
Voltage fluctuations/Flicker
emissions IEC 61000-3-3
Complies
U
SER MANUAL
> VIII. G
ENERAL WARNINGS
87
Vision-R 800 - Essilor automatic phoropter > V1 - 12-2018