Select the program that you wish to use.
The test program is displayed and the first test is set up automatically.
You can:
•
Follow the program’s progression on the
progression bar.
•
Leave the program at any time by clicking on
[STOP].
•
Go to the following test by pressing on:
◦
the associated icon,
◦
on [NEXT] in the case of smart tests.
If you wish to select a test outside the program in progress, press on the test list
or
favorite tests
icons.
It is possible to return to the running program by pressing on the corresponding icon.
b. Checking the optical module
Changing the checked eye
Selecting the examined eye can be done:
•
On the touch screen by selecting:
◦
the power of the right eye or the left eye, for the separate inspection of each eye or,
◦
on the settings (S, C, A, ADD, Hor., Ver.) for the simultaneous inspection of both eyes.
>
2
U
SER
MANUAL
> III. B
ASIC
SETTINGS
FOR
PERFORMING
AN
EXAMINATION
29
Vision-R 800 - Essilor automatic phoropter > V1 - 12-2018
Summary of Contents for Vision-R 800
