INSTALLING WITH SCREWS
58
WeR@Home™ WeR+ Installation Guide
Siren
The wall mount has three holes for installation using screws.
To install the siren using screws:
1.
Release the siren wall mount by lifting the tab and sliding the base in the tab’s direction.
2.
Remove the punch-outs using a flat screwdriver.
3.
Place and hold the base on the desired mounting location.
4.
Mark the drilling locations for the punch-outs.
5.
Drill the holes.
6.
Insert the wall anchors if needed.
7.
Place the base over the wall anchors.
8.
Screw in the screws.
9.
Slide the siren back into its wall mount.