INSTALLING WITH SCREWS
WeR@Home™ WeR+ Installation Guide
53
3.
Position the wall mount against the wall or corner at a height of 2.2 m (7.2 ft.)
4.
Mark the position of the screws through the holes in the wall mount.
5.
Drill holes where marked and insert the wall anchors.
6.
Align the wall mount with the wall anchors.
7.
Screw the screws through the wall mount, into the wall anchors.
8.
Ensure that the motion detector is right side up.
9.
Place the motion detector against the wall mount and press until the motion detector clicks into
place.