INSTALLING WITH SCREWS
56
WeR@Home™ WeR+ Installation Guide
9.
Ensure that:
The top of magnet is aligned with the top of the detector
The magnet is within 4 cm (1.6 in.) of the detector
10.
Press the magnet into place.
Camera Detector
The mounting-base has eight holes to allow for installation flexibility. Varying combinations of holes
allows you to install the camera or motion detector:
Flat on a wall
On an angle facing to the right
On an angle facing to the left
In a corner
The thin plastic covering over the holes can be removed, if necessary. All the corner support holes are
blocked by the mounting-tape. You can drill through the tape, if needed.
4 cm
(1.6 in.)