Page
58
AUXILIARY SERVICES
Dial the password if required by the relay configuration.
Wait for the confirmation tone and hang up.
Remote activation
Please refer to the paragraph “Accessing control menu” at page 47.
A
CTION SEQUENCES
The activation of the alarm input, the expiration of a timer or the occurrence o
fan extension alarm event, can initiate an action or a sequence of actions.
4 different action sequences can be defined through the remote programmer
software. Each sequence can be made up of a minimum of 1 and a maximum of
8 actions among the following:
- using a relay (on, off, impulse))
- waiting for a set amount of time before performing the next action
- internal call (see paragraph “Dialling function”)
- external call (see paragraph “Dialling function”)
- go to another action sequence
- repeating the sequence in progress.
DEFAULT: Hi-Pro is provided with 1 pre-programmed sequence.
- sequence 1:
action 1: calling the number stored in position 197 of the phonebook;
action 2: calling the number stored in position 198 of the phonebook;
action 3: calling the number stored in position 199 of the phonebook;
action 4: calling the number stored in position 200 of the phonebook;
action 5: repeating the sequence 3 times, starting from action 1.
WARNING
The function is not active during remote
programming process, then action sequences
(caused by an alarm input, a timer etc.) won’t
be performed.
Digital input
Hi-Pro is provided with 1 digital input (ALL) which can be programmed as
normally closed or normally open.
