35
Press in the locking stud and push on the
covering cap.
Transport
-
Let the engine cool down.
-
Drain fuel tank.
-
Secure the appliance against slipping and falling over during transportation.
TROUBLE SHOOTING
Problem
Cause
Solution
Engine fails to
start
-
Empty fuel tank
-
START/STOP switch set to
STOP
-
Gas lever not locked at full
throttle
-
Spark plug not correctly
installed
-
Dirty spark plug
-
Excess fuel in the combustion
chamber
-
Spark plug gap is too large
-
Wrong fuel mixture
-
Defective spark plug
-
Add fuel.
-
Set START/STOP switch to START.
-
Press in the fuel lever lock.
-
Tighten the spark plug
-
Clean the spark plug
-
Release the fuel lever lock, set the
choke lever to RUN position and
start the motor a number of times.
If the motor does not start:
remove the spark plug and dry it.
-
Reset the gap (0.6-0.7 mm)
-
Drain the tank and fill with the
correct mixture
-
Replace the spark plug
Motor runs too
quickly
-
Motor is too cold
-
Too short string
-
Let the motor warm up slowly If
necessary set the choke lever
slightly higher.
-
Adjust the string length if needed.
Motor does not
reach maximum
speed
-
The air filter is dirty
-
Dirt in the spark plug
-
Spark plug gap is too large
-
Wrong fuel mixture
-
Clean the air filter
-
Clean the spark plug
-
Reset the gap (0.6-0.7 mm)
-
Drain the tank and fill with the
correct mixture
Motor will not stop
-
Spark plug electrode is grey
and shows signs of
combustion.
-
Insert a spark plug with higher
stop temperature resistance.
