6
Operator’s Manual
38200
|
Eskape™ 2400 Flip-Style Sled Shelter
Check for parts online at
www.GetEskimo.com
or call
800-345-6007
BENCH SEAT MOUNTING
FIGURE
1
FIGURE
2
#38948
#69345
#48261B
#48752B
(38826/38825/38902)
ASSEMBLY
(38822/38821)
ASSEMBLY
(38819/38816)
ASSEMBLY
(A)
Assemble (38826/38825/38902) onto #38948 using
(2) 1 IN bolts, (2) nuts, and (4) washers.
(B)
Assemble (38822/38821) onto #38948 using
(2) 1 IN bolts, (2) nuts, and (4) washers.
NOTE: Be sure to reference Figure 1 for correct hole placement
when mounting assemblies. First two holes must be left open for
mounting hinges later on.
(A)
Assemble (38819/38816) onto (38822/38821)
using (2) 21/2 IN bolts, (2) nuts, and (2) washers.
(B)
Assemble (38819/38816) onto (38826/38825/38902)
using (2) 13/4 IN bolts, (2) nuts, and (2) washers.
NOTE: Tighten all hardware from previous steps.
1
2
SEE DETAIL
Reference the separate
insert sheet (#39050)
Eskape Bench
Seat Assembly
Instructions
for guidance on assembling
your bench seat.
Once assembled, return here
to mount it to your sled.
DETAIL
#48752B
#48752B
(38822/38821)
ASSEMBLY
(38826/38825/38902)
ASSEMBLY
ASSEMBLY INSTRUCTIONS
TOOLS NEEDED:
• (2) 7/16" wrenches and/or socket driver
• Cordless drill with #1 Philips head bit
IMPORTANT ASSEMBLY TIP
DO NOT FULLY TIGHTEN ANY NUT AND BOLT COMBINATION
UNTIL INSTRUCTED IN LATER NOTES. THIS WILL HELP WITH
HOLE ALIGNMENT FOR ALL PARTS.
ASSEMBLY TIPS:
• This ice shelter should be assembled in an indoor setting due to the
time and length of assembly. Identify and familiarize yourself with all
parts and hardware before assembly. Allow 2 hours for assembly.
• The use of a cordless drill with socket will make assembly of your
ice shelter much quicker. Be sure to set the drill speed on low so
you do not over tighten any nut and bolt combination.
• If a tracking kit is purchased with the shelter it should be mounted
to the sled before assembly of the ice shelter for convenience.
#48261B
#48261B
#48270B
#48250B
