ESI IVX 20, Installation Manual

Page: 38 / 55

Function 3: Extension programming IVX 20
F.2
4. CO line group
Assigns the extension’s ability to access one or more CO line groups (9, 8, and 7).
Default: 9.
5. Extension page zone assignment
List the page zones (1, 2, 3) that are to include this extension. All stations are in All Page and can-
not be edited.
Default: 0 (All page).
Note: The overhead paging port (extension 199) can be paged along with other extensions in a
zone by including the desired page zone(s) for extension 199.
All digital phone extensions are included in the all-page zone. Analog extensions cannot be in-
cluded in page zones.
Example: Here is a portion of a completed programming worksheet (Appendix II) for
Digital Phones. Extension 100 has been added to Page Zones 1 and 2. Exten-
sion 102 is allowed to access two line groups and is in Page Zone 1.
1. 2. 3. 4. 5.
Ext. Type Name CO Pg zone
100 DIGITAL Jane 9 1,2
101 DIGITAL Roger 9
102 DIGITAL Sally 9,8 1
112
PHONE Roger 2 9
113 FAX Fax Default: 100.
Analog ports
If an expansion card has been installed, the last two station ports (112 & 113) are analog
ports and are to be programmed as one of the following types: PHONE, RINGER, FAX,
MODEM, DOOR.
1. 2. 3. 4.
Ext. Type Name CO
0 OPERATOR
100 DIGITAL JANE 9
101 DIGITAL ROGER 9
102 DIGITAL SALLY 9,8
112 PHONE ROGER 2 9
113
FAX FAX 9