ESI-50L Administrator’s Manual
Function 4: Auto attendant programming
C.9
Function 373: View RFID tag number
This is used to display tag numbers that are associated to extensions or mailboxes. You can only view tag
numbers with this function. You cannot change any tag numbers or assignments.
Enter the station or mailbox number to display, and then press
#
. If there’s an RFID tag number assigned to
that extension or mailbox, it will appear.
RFID TAG DISPLAY
EXT:
Tip:
You can use
ESI System Programmer
or
ESI System Administrator
to print out a list of assigned
tag numbers.
Function 374: ESI Presence Management parameters
Playing prompts
This determines whether the system plays a prompt — and, if so, which one — when the ESI Presence
Management RFID Reader reads an electronic key. Select
YES
to enable playing of the prompt or
NO
to
disable playing of the prompt.
Default:
YES
(a prompt will play).
EPM RFID READER
PROMPTS: YES >
When this function is set to
NO
, no prompts will play through the ESI Presence Management RFID Reader.
When “EPM RFID Reader prompts” is set to
YES
, prompts will play as shown below. (These prompts can’t
be customized.)
When the RFID Reader displays:
It plays this prompt:
WELCOME
“
Welcome
”
GOODBYE
“
Goodbye
”
ACCESS DENIED
“
Invalid Entry
”
LICENSE EXCEEDED
“
Error
”
ERROR
READER FULL
“
Error
”
Enable/disable sending time and attendance records
Notes:
The NSP must be programmed and connected to a local area network for time and attendance
record collection.
Only ESI Presence Management RFID Readers programmed as type
ENTRANCE/EXIT
(Function 31)
generate time and attendance records.
This parameter is used when the optional
ESI TimeLine
time and attendance management software
application is used in conjunction with the ESI Presence Management RFID Reader.
Use the scroll keys to enable or disable time and attendance records, and press
#
to confirm.
Default:
Disabled.
