ESI-50L Administrator’s Manual
Function 4: Auto attendant programming
C.1
Function 3: Extension programming
This section provides programming for extensions and department groups.
Important:
Where
any
gray shading
(
■
) appears in an example, it represents values either
unavailable
to the function
or
unused
in the particular example.
Function 30: Station move
This feature allows the Installer or Administrator to exchange the extension numbers of two extensions. It is used
only
for exchanging
extensions
—
not
guest mailboxes or departments.
Important:
Before you use this function on two extensions, make sure they’re
both idle
at the time.
Along with the extension numbers, this function also will exchange the following parameters (depending on
station type):
• Extension name and other assignments (including of the Operator to extension
0
from Functions 31 and 32).
• Mailbox information (personal greeting, notification, schedules).
• Programmable
feature
keys.
• Personal
Dex.
Function 30 has the following
limitations
:
• Mailboxes cannot be exchanged. Instead, your Installer must perform flexible number assignment.
• Both extensions must be of the same “type” —
i.e..
, analog to analog, digital to digital — as shown in the
following table:
From . . .
To . . .
Function 30 allowed?
Digital phone
Digital phone
Yes
Analog extension
Analog extension
Yes
Digital phone
Analog extension
No
1
Fax, modem, door, ringer, server,
RFID Reader
Any type of phone
No
To use this feature:
1.
Enter Installer programming through an ESI desktop phone and go to Function 30.
2.
Enter the
first
extension and press
#
.
STATION MOVE
1ST EXT: 104
3.
Enter the
second
extension and then press
#
.
X1044 J SMITH
2ND EXT: 105
(Continued)
1
Your ESI Reseller must use an Installer function to change the numbers of these types of extensions.
