Connector Pin Assignment
ECX-DIO8
Hardware Manual • Doc.-No.: E.3010.21 / Rev. 1.1
Page 19 of 35
4. Connector Assignment
4.1 Power Supply Voltage 24 V (X101)
Device connector: Phoenix-Contact MSTBO 2,5/4-G1L-KMGY
Line connector:
Phoenix-Contact FKCT 2,5/4-ST, 5.0 mm pitch, spring-cage connection,
Phoenix-Contact order no.: 19 21 90 0 (included in the scope of delivery)
For conductor connection and conductor cross section see page 23.
Pin Position:
Pin Assignment:
Labelling on
Housing
24V
-
+
Labelling on
connector
-
+
Pin No.
1
2
3
4
Signal
P24
(+ 24 V)
M24
(GND)
M24
(GND)
P24
(+ 24 V)
Attention:
If the +24 V power supply voltage is connected to other ECX modules via the 24V
power supply connector (X101, pin 3/4 to X101, pin 1/2 ), the current may not
exceed 8 A!
Please refer also to the connecting diagram on page 10.
Signal Description:
P24...
power supply v24 V
M24...
reference potential
Summary of Contents for ECX-DIO8
Page 34: ...8 Declaration of Conformity...
