Hardware Installation
ECX-DIO8
Hardware Manual • Doc.-No.: E.3010.21 / Rev. 1.1
Page 17 of 35
3.
Swivel the ECX module onto the mounting rail in pressing the module downwards
according to the arrow as shown in figure 7. The housing is mechanically guided by the DIN
rail bus connector.
4.
When mounting the ECX module, the metal foot catch snaps on the bottom edge of the
mounting rail. Now the module is mounted on the mounting rail and connected to the
InRailBus via the bus connector. Connect the bus connectors and the InRailBus if not
already done.
Figure 8: Mounted ECX-module
Summary of Contents for ECX-DIO8
Page 34: ...8 Declaration of Conformity...
