![Escorts FarmTrac 45 DT Operator'S Manual Download Page 62](http://html1.mh-extra.com/html/escorts/farmtrac-45-dt/farmtrac-45-dt_operators-manual_2426345062.webp)
Recommended antifreeze : WSN-M97B18-D
Mix with an equal amount of clean water and change every
1200 hours or 24 months (whichever occurs first). See important information under Operation 48 in Section B.
Clean water only :
(Only applicable to hot countries where antifreeze is not available). Chance every 600 hours
or 6 months, whichever occurs first. See important information under operation 48 in Section B.
NOTE :
In order to reduce deposits and corrosion, water used in the cooling system should not exceed the
following limits :
Total hardness
Chlorides
Sulphates
300 parts per million
100 parts per million
100 parts per million
CLUTCH
Pedal free travel
in
1.25-1.50
(mm)
(32-58)
Displacement
Farmtrac 60
in
3
192
(cm
3
)
(3147)
Farmtrac 45
in
3
175
(cm
3
)
(2868)
Compression ratio
16.3 : 1
Firing order
1-2-3
Idle Speed
rev/min
600 - 700
Rated Speed
rev/min
2000
Tappet clearance (cold)
in.
0.014 - 0.018
(mm.)
(0.36 - 0.46)
Exhaust
in
0.017 - 0.021
(mm.)
(0.43 - 0.53)
COOLING SYSTEM
Type
Pressurised Recirculation By-Pass
Fan - number of blades
6
Fan/alternator belt deflection
in
0.5 - 0.75
(mm.)
(13 - 19)
Thermostat
Starts to open at
0
C
71-76
(
0
F)
(160-169)
Fully open at
0
C
85-88
(
0
F)
(185-190)
Pressure Cap
lbf./in
2
13
(bar)
(0.9)
3
SECTION C