![background image](http://html.mh-extra.com/html/esco/isotherm-ifc-110-8/isotherm-ifc-110-8_user-manual_2426042023.webp)
13
Low Temperature BOD Incubator
Upper hinge bolt
Upper hinge
Lower hinge
Glass door
-
4.1 Scheduled Maintenance
Proper and timely maintenance is crucial for trouble free functioning of any device and your Esco unit is no
exception to this rule. We strongly recommend that you follow the maintenance schedule suggested here
under in order to obtain optimal performance from your unit.
No
Description of task to perform
Maintenance to be carried out every
Day
Month
Quarter
Year
1
Decontaminate the work zone
2
Clean the exterior and interior surfaces, screen frame and
temperature probe
3
Inspect the equipment for any physical abnormalities or malfunction
4
Clean up stainless steel surfaces with MEK
5
Lubricate door’s moving parts
6
Check tightness of hinge screws on door’s moving parts
7
Readjustment of door
4.2 Cleaning
Cut off power supply before cleaning.
Clean and wipe exterior and interior surfaces using a wet and soft cloth.
Don’t clean the equipment with water.
4.2.1 The Glass Door
Glass door is designed to allow the user to observe loads in the equipment during operation, without opening
of the door and causing temperature inaccuracy. Regular cleaning of glass door is recommended.
To clean the glass door:
1.
Rotate the glass door handle less than 90
o
2.
Remove upper hinge bolt and remove glass door upward
3.
Clean the glass door using non-corrosive (chlorine and hydrochloric acid-free) water, alcohol or
surface detergent.Neutral detergent is recommended.
4.
Reverse the above steps to re-assemble the glass door.
Summary of Contents for Isotherm IFC-110-8
