Esco Isotherm IFC-110-8, User Manual

Page: 19 / 32

9
Low Temperature BOD Incubator
There must be sufficient spacing of the load inside the equipment to ensure proper ventilation within
the equipment. Do not place any load on the floor, against the side wall or underneath the ceiling of
the equipment.
In order to ensure optimal ventilation, shelf should be inserted so that air spacing between shelves,
door, load and inner chamber wall is approximately equal.
Maximum quantity and loading of shelves can be seen in “Technical Specification Summary Table”.
Improper loading may increase the time on reaching the set temperature.
3.3 Menu & Options
Basic setting

Alarm setting
 
Timer setting
 
Password setting
 
Address setting
 
Timer setting of manual-operation on UV lamp
 
Timer setting of auto-operation on UV lamp
 
Defrosting setting
 
Program operation
 
Calibration
 
System Parameter
Display
(Diagnostic Mode)

Version number
 
.

AD sampling value
 
Present value
 
.

Set value
 
.

Upper limit of measuring range
 
.

Lower limit of measuring range
 
.

Historic record of temperature
 
 
Factory Settings

 