3
Battery Change
This inflator requires 2 x AAA batteries. If the
voltage of the batteries fall below 2.6 volts, the
battery icon will flash continuously until it shuts
down. If the voltage of the batteries fall below
1.
Remove the impact bumper by pulling it up
from the inflator base.
2.
Slide battery cap up.
Replace batteries noting polarity
marks (+ or -).
3.
Replace the battery cap.
4.
Replace impact bumper by pushing over
inflator housing making sure to put locating
lugs back into the correct position.
WARNING
To avoid the risk of personal injury, especially to the eyes, face or skin, DO NOT direct the
air stream at any person, or any part of the body. This equipment is not intended for use by
children without adult supervision. The manufacturer reserves the right to change product
features at any time without notice.
2.5 volts, the low “LO” battery icon appears
while the power is on and then shuts down
automatically. The batteries must be changed if
the battery icon flashes.
