2
Digital
Tire Inflator
Thank you for selecting th
e Digital
T
i
re Inflator.
Please read this manual before carrying out any
installation or service procedure. This manual is
an integral and essential part of the product,
please keep it away from damp, heat, dust, oils,
do not remove, tear or amend any parts of the
manual for any reason. It must be made
available to the operator and to maintenance
personnel, also to ensure staff training. If you
lose or damage the manual, ask the
manufacturer for a copy, quoting the Part No.
The manual must always remain with the
machine, in the event of the machine being
sold, it must be given to the new user. The
manufacturer reserves the right to change
product features at any time without notice.
IMPORTANT
This tire inflator must only be connected to air
line systems which have clean dry air. Any
moisture in the air line system may cause
damage to the operation of this tire inflator
and void warranty.
Air pre-filters must be used with this inflator to
ensure product accuracy and longevity.
Features
■
Auto ON, upon air pressure sensing
■
Large tilted LCD display with backlight and
90 second auto OFF
■
IP rating = IP44
■
Multi scale gauge
■
Die cast aluminium unit with impact bumper
and lightweight ABS handle and trigger
■
Supplied with official calibration certificate
■
Wire sheathed hose on flex area of hose to
eliminate kinking
■
Lightweight and robust
■
Complies with EN12645: 2014*
Operation
■
To read pressure:
Remove t
i
re valve cap.
With clip-on air chuck lever depressed, firmly
press chuck onto t
i
re valve stem and release
lever, ensure that no air leaks.
Check pressure gauge, the digital display
will
activate once the t
i
re pressure is sensed.
If no
pressure is sensed the display will not
turn on.
Press the t
i
re inflator lever to add air
into the
t
i
re, before reading the pressure.
■
To inflate:
With clip-on air chuck lever depressed, firmly
press chuck onto tire valve stem and release
lever, ensure that no air leaks.
Fully depress the tire inflator lever for an
appropriate period of time and release the lever.
Check pressure gauge and repeat the
procedure until correct pressure level is
achieved.
■
To deflate:
With clip-on air chuck lever depressed,
firmly
press chuck onto t
i
re valve stem and
release
lever, ensure that no air leaks.
Depress the t
i
re
inflator lever half way (until
air can be heard to
be escaping) for an
appropriate period of time
and release the lever.
Check pressure gauge
and repeat the
procedure until correct
pressure level is
achieved.
Safety
■
Never exceed the maximum pressure of
the
t
i
re.
■
Check that the hose and chuck are in good
condition with no damage or cracks.
■
Ensure safe working environment when
using
compressed air.
■
Return to
authorized
service agent for repair
and maintenance.
