ESCO Technologies ETS-Lindgren, Assembly And Maintenance Manual

Page: 27 / 30

27
9.0 3-POINT CAM LATCH DOOR MAINTENANCE
The door and jamb assembly on the Double Electrically Isolated (DEI) Enclosure
is one of the most important components of the shielded enclosure, and was
manufactured for maximum shielding effectiveness. The following careful and
regular maintenance is required to maintain this high level of shielding.
9.1 WEEKLY
• Inspect door and jamb contact surfaces for signs of corrosion or contact
finger damage.
• Wipe down fingers and sealing surfaces with a clean cloth dampened with
denatured alcohol.
9.2 MONTHLY
9.2.1 CLEAN DOOR JAMBS
Clean the brass
(or galvanized
steel) doorjamb
using the
provided
sanding bar.
Before performing any
maintenance, follow
the safety information
in the ETS-Lindgren
Product Information
Bulletin
included with
your shipment.