ESCO Technologies ETS-Lindgren, Assembly And Maintenance Manual

Page: 14 / 30

14
STEP 7 - BOLT WALL PANELS
STEP 8 - INSTALL FINISHED FLOOR
Tighten clamps
and align all
panels before inserting
and tightening the
4 in bolts.
Panels can
form leaks,
especially where floor
and wall panels are
joined. Before aligning
the panels, loosen all
bolts on a seam to
ensure a consistent
panel fit. The edges
of the wall and ceiling
panels or wall and floor
panels must
align perfectly.
For more
information
on correcting leaks,
see Correcting Leaks
section of this guide.
Check
alignment of
the panels as they go
together to avoid having
to disassemble and re
adjust them later.
Never use a hammer
directly on the shielding
material.