ESCO Technologies ETS-Lindgren, Assembly And Maintenance Manual

Page: 10 / 30

10
3.0 BEFORE YOU BEGIN ASSEMBLY
3.1 INSPECT CONTACT EDGES
The most critical parts of each frame are the surfaces that connect the panels,
the two contact surfaces along the edges.
• Keep the contact edges clean at all times.
• As the room is being assembled, visually inspect all of the contact surfaces.
This inspection is especially important on an all metal enclosure (not a
screen room).
• The contact surfaces should be free of any paint, grease, dirt, and corrosion.
If the panels were stored in a damp environment, the edges may be
slightly corroded.
For information
on cleaning
contact surfaces, see
the
Cleaning Contact
Surfaces section of
this guide.
Before assembling any
components, follow
the safety information
in the ETS-Lindgren
Product Information
Bulletin
included with
your shipment.