■
Procedures to set up time to automatically turn off the power
-
Push the “C” key for 5 seconds while the weight, quantity, unit weight of the scale are zero state and Tare is released as the picture No. 1.
W eighing range : 40 g ~ 6/15 kg, e = d : 2 g / 5 g
(0.1 lb ~ 15/30 lb, e = d : 0.005 lb/0.01 lb)
lb
Model : CB-15N
WEIGHT
UNIT WEIGHT
QUANTITY
BAT
Short
Unit Wt.
TOTAL
TARE
ZERO
Short
Q'ty
kg
g/pc
pcs
-
Set up the preferable time to turn off the power by using the “+” key or “=” key while the display is showing as picture No. 2.
W eighing range : 40 g ~ 6/15 kg, e = d : 2 g / 5 g
(0.1 lb ~ 15/30 lb, e = d : 0.005 lb/0.01 lb)
lb
Model : CB-15N
WEIGHT
UNIT WEIGHT
QUANTITY
BAT
Short
Unit Wt.
TOTAL
TARE
ZERO
Short
Q'ty
kg
g/pc
pcs
-
Complete the procedures to set up the time using the “M” key. Not pushing the “M” key does not save this function.
z
The scale is automatically turned off when not being used for selected time without inputting a key or changing the weight.
z
Used in order to prevent unnecessary consumption of the battery.
z
Select time to automatically turn off the power as OFF – 5min.- 10min. – 30min. – 60min. – 120min.
z
Release the time setup by setting up with ‘OFF’.
z
Without inputting a key for 5 seconds will automatically set back to the scale mode in the picture No. 2.
z
The scale is dispatched with ‘5 minutes automatic turning off the power’ mode. (The scale is automatically turned off when not being used for 5 minutes.)
7.
Error Indication and its Information
Error Information
Solution
Error
Information
Solution
Err-01
Memory reading error
A/S
Err-02
Zero range error (Test mode)
A/S
Err-03
Problems in Weighing range (Test mode)
A/S
Err-d0
Exceed maximum weight
Check the platform, A/S
Err-d1
Below minimum weight
Check the platform
Err-d2
Problems in AD converter
A/S
Err-d3
Tare range error: Unstable condition, Exceed
tare range, Setting up the Tare during “-
(minus)“ weighing
Check the scale
Err-d4
Exceed maximum data range of AD
converter
Check to see if there is anything
on the platform, A/S
Err-d5
Below minimum data range of AD converter
Check the platform, A/S
Err-d6
Weighing range error
A/S
Err-d7
Problems in Zero / Exceed the range
A/S
Err-d8
Not in a stabilized condition
The
scale
is
experiencing
vibrations or wind currents : Place
the scale in a stabilized condition
- When the scale stops operating or ON/OFF key does not operate
- Reset the battery or adapter jack. When they do not operate after resetting the battery or adapter jack, claim the after service.
