© 2019 Escalade Sports
For Customer Service Call 1-888-996-2729
8
All Rights Reserved.
PARTS REQUIRED:
4 pcs -
H6
Phillips Flat Head Screw
2 pcs -
P9
3-White Player Rod Assembly With Rod Washers, Rod Bumpers,Rod End Cap,Rod Handle
4 pcs -
H7
Phillips Flat Head Screw
1 pc -
P10
2-White Player Rod Assembly With Rod Washers, Rod Bumpers,Rod End Cap,Rod Handle
2 pcs -
P6
3-Red Player Rod Assembly With Rod Washers, Rod Bumpers,Rod End Cap,Rod Handle
1 pc -
P11
5-
White Player Rod Assembly With Rod Washers, Rod Bumpers,Rod End Cap,Rod Handle
1 pc -
P7
2-Red Player Rod Assembly With Rod Washers, Rod Bumpers,Rod End Cap,Rod Handle
2 pcs -
P12
Manual Scorer
1 pc -
P8
5-Red Player Rod Assembly With Rod Washers, Rod Bumpers,Rod End Cap,Rod Handle
2 pcs -
P13
Ball Entry Cup
16 pcs -
P14
Quick Connect Bushing - male plug
STEP 7:
= WHITE
PLAYER
= RED
PLAYER
P6
FIGURE 7
DETAIL B
DETAIL C
P7
P8
P6
P9
P9
P10
P11
ORDER OF PLAYERS
(OVERHEAD VIEW)
H6
P12
P14
P13
H7
STUDY DIAGRAM CLOSELY
FOR CORRECT SOCCER
PLAYER ROD PLACEMENT.
FOR “EASE OF ASSEMBLY”, YOU WILL NOW EXPERIENCE THE TECHNOLOGY OF THE
“QUICK CONNECT ROD ASSEMBLY”.
Place the Player Rods into the cabinet bushings as per the player placement diagram below.
Snap
Quick Connect Bushing - male plugs
P14
into the female bushing as shown in
DETAIL B
.
NOTE: There will be four rod handles on each side of the table. It is critical that you set the rods as
shown below so the players will be correctly placed.
Attach Manual Scorers
P12
to End Aprons
P2
using
Phillips Flat Head Screws
H6
as shown in
FIGURE7
.
Attach Ball Entry Cups
P13
to Side Aprons
P1
using
Phillips Flat Head Screws
H7
as shown in
DETAIL C
.
Tighten, but Do Not strip out screws.
Must “Lock” into
female bushing
Squeeze Push
Lock to release
Installed backwards and
will not lock into place
