© 2019 Escalade Sports
For Customer Service Call 1-888-996-2729
5
All Rights Reserved.
PARTS REQUIRED:
4 pcs -
H1
Phillips Round Head Screw
6 pcs -
H2
Phillips Flat Head Screw
2 pcs -
P1
Side Apron
With Female
Bushings Attached
1 pc -
P2
End Apron
With Ball Catcher
Attached
FIGURE 1
STEP 1:
Find a clean, level place to begin the assembly of
your soccer table. We recommend building the
table on the box top to protect the parts
during assembly.
It is very important to assemble table on
a level and flat surface. This will keep
the end aprons and side aprons
“FLUSH” on the top and bottom edges.
.
P2
H2
H1
H1
P1
P1
PARTS REQUIRED:
1 pc -
P3
Playfield
STEP 2:
Install Playfield
P3
onto Side Aprons
P1
as shown in
FIGURE 2
.
P1
P1
P3
FIGURE 2
All edges must
be assembled FLUSH
with each other
H2
Attach Side Aprons
P1
onto End Apron
P2
using Phillips Round Head Screws
H1
and Phillips Flat Head Screws
H2
as shown in
FIGURE 1.
Tighten, but Do Not strip out Screws.
IMPORTANT NOTE:
Be sure
Phillips Flat Head Screws H2
are screwed “FLUSH” for later Leg
assembly.
NOTE:
All Phillips Round Head Screws
H1 and Phillips Flat Head Screws H2
must be installed flush with cabinet.
NOTE:
Playfield Graphic on
the underside facing the floor
Tight and
Flush Fit
