H4
P4
FIGURE 6
THIS STEP REQUIRES TWO OR MORE
VERY CAREFULLY TURN THE
ITS LEGS. BE CAREFUL. THE
© 2019 Escalade Sports
For Customer Service Call 1-888-996-2729
7
All Rights Reserved.
PARTS REQUIRED:
8 pcs -
H3
Phillips Round Head Screw
2 pcs -
P5
Playfield Support Brace
STEP 5:
FIGURE 5
H3
H3
P5
P5
PARTS REQUIRED:
8 pcs - H4 Allen Head Bolts
1 pc - T1 Allen Wrench 8 pcs - H5 Flat Washer
4 pcs - P4 Leg
STEP 6:
H5
P4
P4
P4
P4
P2
P1
DETAIL A
ADULTS.
TABLE OVER AND SET IT ON
TABLE IS VERY HEAVY.
CAUTION:
LEG
NOTE:
Please study this diagram
for correct assembly.
NOTE:
Please watch closely that both
male inner locks on the leg are
correctly inside of and locked
into the female counter part.
Attach
Playfield Support Braces
P5
onto Side
Aprons
P1
using
pilot holes with Phillips Round
Head Screws
H3
as shown in
FIGURE 5
.
Tighten, but Do Not strip out H3
Screws
.
Attach
Legs
P4
onto Side Aprons
P1
and
End Aprons
P2
as shown in
FIGURE 6
and
DETAIL A
.
Secure Legs P4 using Allen Head Bolts
H4
,
and Flat Washers
H5
as shown in
FIGURE 6
.
Use Allen Wrench T1 to tighten all Legs P4.
NOTE:
Carefully align
the inner locks and push
down on leg to correctly
“Lock” the inner lock leg
design.
NOTE:
Pilot holes in
Side Aprons
NOTE:
While pushing in on bottom of leg,
it may be necessary to lightly tap
down on the leg with a rubber
hammer.
