© 2019 Escalade Sports
For Customer Service Call 1-888-996-2729
6
All Rights Reserved.
PARTS REQUIRED:
4 pcs -
H1
Phillips Round Head Screw
6 pcs -
H2
Phillips Flat Head Screw
1 pc -
P2
End Apron
Witn Ball Catcher
Attached
FIGURE 3
H1
H2
H1
H2
P2
P1
P1
PARTS REQUIRED:
16 pcs -
H2
Phillips Flat Head Screw
STEP 4:
STEP 3:
H2
H2
FIGURE 4
P3
All
PLAYFIELD MUST BE CENTERED
PLAYFIELD MUST BE CENTERED
BEFORE INSTALLING
PHILLIPS
FLAT HEAD SCREWS H2
Attach End Apron
P2
onto Side Aprons
P1
using Phillips Round
Head Screws
H1
and Phillips Flat Head Screws
H2
as shown in
FIGURE 3
.
Tighten, but Do Not strip out Screws.
IMPORTANT NOTE:
Be sure Phillips Flat Head Screws H2 are screwed
“FLUSH” for later Leg assembly.
Be sure Playfield P3 is centered before tightening H1 and
H2.
NOTE:
All Phillips
Round Head Screws
H1 and Phillips Flat
Head Screws H2 must
be installed flush with
cabinet.
NOTE:
Be careful to install the Phillips
Round Head Screws H1 and Phillips Flat
Head Screws H2 into their correct locations
as per Figure 3.
NOTE:
All edges
must be assembled
“FLUSH” with each
other.
Center and attach Playfield
P3
into the cabinet
using pre-drilled holes with Phillips Flat Head
Screws
H2
as shown in
FIGURE 4
.
Tighten, but Do Not strip out H1 and H2
Screws.
.
.
IMPORTANT NOTE:
Please be sure to install
Phillips
Flat Head Screws H2
exactly as per
FIGURE 4.
Screws must be screwed straight
down.
