V-TAC VT-ST303 Installation Instruction Download

Page: 1 / 13

LED SOLAR STREETLIGHT

TECHNICAL DATA:

INTRODUCTION & WARRANTY

WARNING!

LAMP POST INSTALLATION

WALL MOUNT INSTALLATION

PARTS INCLUDED

INSTALLATION GUIDE:

MAINTENANCE

REMOTE CONTROL

INSTALLATION INSTRUCTION

1. Installation must be performed by a qualified electrician
2. Replace any cracked protective shield.

3. Keep away from the fire.

4. Don't immerse in the water

5. Luminaire cannot be installed in low-lying areas, so as not to soak.

This marking indicates that this

product should not be disposed

of with other household wastes.

3 hours regular

6 hours regular

8 hours regular

Optically controlled mode

Semi-bright mode

Force to turn on the lights

(Optical control is null)

Force to turn off the lights

(Optical control is null)

Full bright mode

• Before installing please remove all the parts to check if all are in good condition or not.
• Install the Protruding Pole on a wall or on a Lamp Pole with the Expansion Screws
• Fix the Solar Panel on the Bracket. Fix them on the Mounting Arm and tighten the screws.
• Place the Mounting Arm on the top pole part of the Protruding Pole
• Fix the Luminaire on the front portion of the Protruding Pole
• Make sure that the connection Plug on the luminaire is carefully stretched out from the hole

beneath the Protruding Pole
• Now Connect the plugs and tighten the Waterproof Cap.
• The luminaire should be connected to the solar panel against the sun light. Please makes

sure the solar panel is adjusted in correct angle in order to receive sunlight.
• After installation test the light using the remote control.
• The remote control is designed with an operation distance of 8-10m

• Clean the light with a dry, lint-free cloth.
• Check the solar panel for dirt regularly. If dirt or is present remove it to guarantee flawless

function of the product.
• Especially during the winter, keep the product free from snow and ice.
• Confirm installation direction is correct (solar panel should be at top)
• Confirm no objects blocking the solar panel to receive sunlight

Light Source

Internal six angle

screw fixation

Mounting Arm

(For Solar Panel)

Solar Charging

(The battery is in the lamp housing)

Screw fixation

Hole

Protruding Pole
(For Wall/Pole Installation)

Expansion Plate

Plug the male and female plugs

and tighten the waterproof cap

Light Source

Internal six angle

screw fixation

Solar Charging

(The battery is in the lamp housing)

Screw fixation

1.2m Wire

Expansion Screw 2*6

Moun�ng Arm

(For Solar Panel)

Solar Panel Bracket

Solar Light

Solar Panel

Remote Control

1 Expansion Plate

(For Lamp Post Installa�on)

Thank you for selecting and buying V-TAC product. V-TAC will serve you the best. Please read these
instructions carefully before starting the installation and keep this manual handy for future reference.
If you have any another query, please contact our dealer or local vendor from whom you have
purchased the product. They are trained and ready to serve you at the best. The warranty is valid for
3 years from the date of purchase. The warranty does not apply to damage caused by incorrect
installation or abnormal wear and tear. The company gives no warranty against damage to any
surface due to incorrect removal and installation of the product. This product is warranted for manu
facturing defects only.

YEA

WARRANTY

IN CASE OF ANY QUERY/ISSUE WITH THE PRODUCT, PLEASE REACH OUT TO US AT: [email protected]

FOR MORE PRODUCTS RANGE, INQUIRY PLEASE CONTACT OUR DISTRIBUTOR OR NEAREST DEALERS.

V-TAC EUROPE LTD. BULGARIA, PLOVDIV 4000, BUL.L.KARAVELOW 9B

IP65

RATING

Protruding Pole

(For Wall/Pole Installa�on)

Mounting Arm

(For Solar Panel)

Protruding Pole
(For Wall/Pole Installation)