background image

 

 

Solar Flame Effect Coach Lantern 

K763   

v001: 06/05/22 

 

Please read and retain these instructions for future reference 

The Enterprise 
Department 

 UK Head Office, 11 Bridge Street, 

Bishop’s Stortford, CM23 2JU

 

 Tel: 0844 4824400*,    Fax: 01279 756595 
 www.coopersofstortford.co.uk 
 EU address: D.S.B. LD, 160 Bd. de Fourmies, 59100 Roubaix, France 
 Tel: (+44) 1279 701269 

 *UK 

Calls cost around 7 pence per minute plus your telephone company’s networ

k access.  

  Please check with your telephone supplier. 

 
 

ASSEMBLY INSTRUCTIONS / INSTRUCTIONS FOR USE: 

Unpack the components carefully. Please check all parts have been removed from the packaging. 

Before using first time 

Allow lamp to charge for at least 8 hours in full sunlight with the ON/OFF switch in the ON position. The 
ON/OFF switch is located under the solar panel. Once the batteries are fully charged, set the ON/OFF switch 
to ON. If the lamp does not turn on after dark refer to Maintenance section.  
 
NOTE: In order to verify that the button is correctly in the 

“ON ” position, cover the solar panel with your hand and 

light should turn “ON” automatically.

 

 

Find an ideal Place for the Solar Light.

 

Place the solar light in an area where it will receive direct 
sunlight for at least 8 hours per day. The number of hours 
the light will illuminate is directly proportional to the 
hours of sunlight it receives. If the light is placed in a 
shaded area, it will not be able to fully charge and its 
illumination time will be limited. Do not place the light 
near other outdoor lighting like porch or streetlights. 
These may fool the sensor and keep the light from 
coming on, or cause it to turn off automatically 

 

 

Always position in direct sunlight. 

 
Dimensions 

(H) 27 x (W) 13 x (D) 21cm 
 

 

WARM WHITE FLICKERING FLAME EFFECT LED FOR 
THE EFFECT OF CANDLE LIGHT WITHOUT THE FAFF! 

 

INTEGRAL SOLAR PANEL 

 

FIXINGS INCLUDED 

 

TRADITIONAL STYLE COACH LANTERN IN A BRONZE 
LOOK FINISH WILL AUTOMATICALLY ADD A VINTAGE 
WARM GLOW TO ANY SURROUNDING AREA, 

 

Input voltage:1x1.2V AAA Nimh 

 

300mah battery required(included) 

Reviews: