24
18
5
18
4
24
18
5
18
4
21.
With at least two capable people, raise the backboard assembly
up and have the third attach Lower Board Arms to lower mounting
tubes on backboard using two bolts (#24), two plastic washers
(#5), four washers (#18) and two lock nuts (#4). See
Figure 13
.
NOTE: Do NOT over tighten these bolts. This is a pivot point.
Snug is tight enough.
22.
Attach Upper Board Arms to upper mounting tubes on backboard
using two bolts (#24), two plastic washers (#5), four washers
(#18) and two lock nuts (#4). See
Figure 13
.
NOTE: Do NOT over tighten these bolts. This is a pivot point.
Snug is tight enough.
Figure 13
ATTACHING BA CKBOARD T O BO ARD ARMS
REQUIRES A
12
T LEAST THREE CAPABLE ADULTS.
DO NOT DUNK ON THIS UNIT .
DO NOT HANG FROM ANY PART OF THIS
UNIT , INCLUDING THE BACKBOARD, RIM,
SUPPORT BRACES OR NET
.
4L-8152-00
W
AR
NI
NG
!
23
