background image

esatto.house

 05

DECLARATION OF CONFORMITY

This appliance complies with the following  
European Directives and Australian Standards:

—  2006/95/CE General regulations / Low tension
—  2009/142/CE Concerning gas appliances
—   1935/2004/CE 90/128/EEC This appliance is suitable  

to come in contact with food

—  2004/108/CE Electromagnetic compatibility
—   AS4551, AS/NZS 5263.0, AS/NZS 5263.1.1: Domestic gas 

cooking appliances

—  Low voltage: 73/23
—   Safety standards: EN 60335-1, EN30-1-1,  

AS/NZS 3350-1,3350-2-6

The manufacturer declares that the cooktop is built using 
certified materials and requires the appliance to be installed 
in accordance with the standards currently in force. This 
cooktop should only be used by a trained person and for 
domestic purposes only.

UNPACKING

During transportation, protective packaging was used to 
protect the appliance against any damage. After unpacking, 
please dispose of all elements of packaging in a way that will 
not cause damage to the environment. All materials used for 
packaging the appliance are environmentally friendly; they 
are 100% recyclable and are marked with the appropriate 
symbol.

►   During unpacking, the packaging materials (polythene 

bags, polystyrene pieces, etc.) should be kept out of 
reach of children.

DISPOSAL OF THE APPLIANCE

Old appliances should not simply be disposed of with 
normal household waste, but should be delivered to a 
collection and recycling centre for electric and electronic 
equipment. A symbol shown on the product, the instruction 
manual or the packaging shows that it is suitable for 
recycling.

Materials used inside the appliance are recyclable and are 
labelled with information concerning this. By recycling 
materials or other parts from used devices you are 
making a significant contribution to the protection of our 
environment.

Information on appropriate disposal centres for used 
devices can be provided by your local authority.

Summary of Contents for ECGW60S





















Reviews: