Esatto ECG6F, User Manual

Page: 8 / 20

Page:
08
User Manual:
INSTALLATION INSTRUCTIONS
It’s important to carefully read the following installation
instructions before beginning the installation of your
cooktop.
IMPORTANT!
The installation must be carried out by a suitably qualifi ed
and authorised person, in accordance with the current
version of the following:
► AS/NZS5601.1 Gas Installations - current edition
► NZS 5261 – Code of Practice for the Installation of Gas
Burning Appliances and Equipment (New Zealand)
► Local gas fi tting regulations
► AS/NZS 3000 – Electrical Installations (Wiring Rules)
► Building codes
► Installation Instructions
POSITIONING
The adjacent cabinetry and wall materials must be able to
withstand a minimum temperature rise of 65°C above the
ambient temperature of the room.
► This appliance has been designed for use within a
kitchen.
Important!
The cooktop must not be installed in a bathroom or shower
room.
This appliance is classifi ed as Class 3 and therefore is to
be built into a kitchen unit (depending on size) or 600mm
deep worktop, providing the following minimum distances
are allowed:
► The minimum clearance from a combustible surface
shall be a 200 mm horizontal distance from the
periphery of any gas burner (AS 5601). Where the
horizontal clearance is less than 200mm, that vertical
surface must be protected by a non-combustible
material for 150mm above the cooktop surface across
the entire length (depth, width), indicated below. The
150mm protected surface may be ceramic tiles or
another approved non-combustible material.
INSTALLATION UNDERNEATH YOUR RANGEHOOD
Where possible, the manufacturer recommends maintaining
a clearance of 760mm from the top of the burner cap to the
underside of the rangehood. This will allow the rangehood
to perform at optimal extraction.
The minimum clearance required per the Australian
standard (AS/NZS 5601.1&2) is 650mm.
760MM
N OT A L LO W E D R E C O M M E N D E D
Installation Instructions