Esatto ECG6F, User Manual

Page: 14 / 20

Page:
14
User Manual:
By ensuring proper cleaning and maintenance of your
Esatto cooktop, you can ensure that it will have a long and
fault free operation.
WARNING!
Do not start cleaning the cooktop until it has
completely cooled.
► Typically you should only ever need to clean your
cooktop with warm soapy water, or light cleaning
products to assist with the removal of fat or oil
emulsions (such as general cleaning sprays).
► Your cooktop should be cleaned after every use.
► After cleaning the burners, you should ensure they
are dried properly before replacing on the cooktop.
► Avoid any harsh scourer pads or steel wool, as these
can scratch the stainless steel.
OPERATION IN CASE OF EMERGENCY
In the event of an emergency you should:
► Switch off all cooktop controls.
► Switch the gas off at the isolation switch
or at the gas meter.
► Call the Residentia Support Team on
1300 11 HELP (4357).
Some minor faults can be fixed by referring to the
instructions given in the Troubleshooting section
below. There is also a self-help section online at
http://www.residentiagroup.com.au.
TROUBLESHOOTING
IMPORTANT!
If your appliance appears to be operating incorrectly, then
you should disconnect it from your mains gas and electrical
supply and then contact the Residentia Group Support
team on 1300 11 HELP (4357).
WARNING!
DO NOT ATTEMPT TO REPAIR THE COOKTOP YOURSELF.
Please note that if an engineer is asked to attend whilst the
product is under warranty and finds that the problem is
not the result of an appliance fault, then you may be liable
for the cost of the call out charge.
The appliance must be accessible for the engineer to perform
any necessary repair. If your appliance is installed in such
a way that an engineer is concerned that damage will be
caused to the appliance or your kitchen, then they will not
complete a repair. This includes situations where appliances
have been tiled in or sealed in with sealant.
Please refer to the conditions of that appear on the warranty
card at the rear of this user manual.
ELECTRICAL DETAILS
Rated Voltage: 220 - 240 Vac 50 / 60 Hz
Supply Connection: 3A
Max Rated Inputs: 0.8 W
Mains Supply Lead: 3 core x 0.75mm² (Type RR-F <HAR> marked)
GAS TYPE & OPERATING PRESSURE
Connection: Rp ½ (ISO R7)
Type: Natural Gas (1.0 KPa)
ULPG (2.75 KPa)
Technical Data
Cleaning & Maintenance