ESAB PUA 1 Manual Download

Page: 66 / 80

-- 66 --

bu12d04a

9.3

Quality Functions

MAIN MENU

AUXILIARY FUNCTIONS

QUALITY FUNCTIONS

Quality functions keep track of a number of interesting data for individual welds.

These functions are:

Time of the weld start
How long the weld lasted
Average. max. and min. current for the weld
Average. max. and min. voltage for the weld
Average. max. and min. effect for the weld

In addition, it is possible to manually reduce the length of the weld joint, and the weld

data unit calculates the extension energy.

The number of welds since the last resetting is also shown. Information can be

stored for a maximum of 100 welds. The welds after these first hundred are ignored.

The weld must be longer than 1s to be registered.

The last noted weld appears in the display, but it is also okay to look among the

other noted welds.

When you press RESET, all variables are set to zero.

QUALITY FUNCTIONS

WELD

START: 01--JUN--97

12:00.02

WELD TIME:

0.0s

WELD LENGTH 0 in HEAT FLOW0.0 kJ/in

AVE.

MAX

MIN

I(Amp)

0.00

U(V)

0.00

P(kW)

0.00

NUMBER OF WELDS BEFORE THE LATEST RESET

RESET

QUIT

Select a certain weld by increasing/decreasing with

and the positioning

the cursor on the line which shows the current weld.

State the length of the weld joint in the respective field to bring up the extension

energy in the corresponding way.

Summary of Contents for PUA 1

















































































Search results

Summary of Contents for PUA 1

Reviews:

Related manuals for PUA 1

Brands by name

Popular brands

ESAB PUA 1, Manual

Search results

Summary of Contents for PUA 1

Reviews:

Related manuals for PUA 1

Brands by name

Popular brands