ESAB OrigoFeed 30-2, Instruction Manual, Page: 17 / 34

-- 17 --
bm38d1ea
4 TECHNICAL DATA
OrigoFeed 30--2 OrigoFeed 30--4
Power supply 42 V 50--60 Hz 42 V 50--60 Hz
Power requirement 336 VA 336 VA
Motor current I
max
3.5 A 3.5 A
Settings data
Wire feed speed
Burnback time
Spot welding time
1.5--22.0 m/min
0--0.7 s
-- 1.5--22.0 m/min
0--0.7 s
0.2--5 s
Gun connection EURO EURO
Max. diameter wire bobbin 300 mm 300 mm
Wire dimension
Fe
Ss
Al
Cored wire 0.6--1.2 mm
0.6--1.2 mm
1.0--1.2 mm
0.8--1.2 mm 0.6--1.6 mm
0.6--1.2 mm
1.0--1.6 mm
0.8--1.6 mm
Weight 12.6 kg 13.2 kg
Dimensions (l x b x h) 569 x 259 x 355 mm 569 x 259 x 355 mm
Shielding gas
max pressure
Gases for MIG/MAG welding
5 bar Gases for MIG/MAG welding
5 bar
Maximum permissible load at
60% duty cycle
100% duty cycle 365 A
280 A 365 A
280 A
Enclosure class
basic version
with sealed bobbin holder*
with MarathonPac
t
IP2X
IP23
IP23 IP2X
IP23
IP23
* Accessories, see page 32.
Enclosure class
The IP code indicates the enclosure class, i. e. the degree of protection against penetration by solid
objects or water. Apparatus marked IP2X are intended for indoor use.
Enclosure class
The IP code indicates the enclosure class, i. e. the degree of protection against penetration by solid
objects or water. Equipment marked IP23 is designed for indoor and outdoor use.
Duty cycle
The duty cycle refers to the time as a percentage of a ten--minute period that you can weld at a cer-
tain load without overloading.
5 INSTALLATION
The installation must be executed by a professional.
GB