ESAB Origo MA23, Instruction Manual

Page: 5 / 16

- 5 -
bi21d1ea
2 MIG/MAG WELDING
2.1 Settings
Functions Setting range MA23 MA24
Voltage 8 - 60 V x x
Wire feed speed 0.8 - 25 m/min x x
Synergy OFF or ON - x
Synergic lines 15 pcs - x
QSet OFF or ON - x
Manual setting OFF or ON - x
Creep start OFF or ON - x
Creep start
1)
0=OFF or 1=ON x -
Crater filling OFF or ON - x
Crater filling time 0 - 5 s - x
2/4-stroke
2)
2 stroke or 4 stroke x x
Active panel OFF or ON x x
Changing trigger data OFF or ON x x
Remote control unit OFF or ON x x
Gas flushing
2)
- x x
Wire inching - x x
Inductance 0 - 100 x x
Welding data memory 1, 2, 3 x x
Gas pre flow time
1)
0.1 - 9.9 s x x
Unit of measurement
1)
0 = inch, 1 = mm x x
Burnback time
1)
50 - 250 ms x x
Gas post flow time
1)
0.1 - 9.9 s x x
1)
These functions are hidden functions, see description point 2.3.
2)
These functions cannot be changed while welding is in progress
2.2 Symbol and function explanation
MIG/MAG welding
MIG/MAG welding melts a continuously supplied filler wire, with the weld pool being
protected by shielding gas.
Wire feed speed
This sets the required feed speed of the filler wire in m/minute.
GB