7 MAINTENANCE
0447 209 001
- 31 -
© ESAB AB 2022
4. Remove the screws holding the left side panel
(L)
and remove the panel.
5. Clean the left side of the power source, using dry compressed air with reduced
pressure.
6. Make sure that there is no dust left on any part of the power source.
7. After having finished cleaning the power source, reattach the power source panels in
the reverse order.
8. Tighten the screws on the side panels with 5 Nm ± 0.3 Nm (44.25 in lb. ± 2.6).
