ESAB EPP-200, Instruction Manual

Page: 17 / 52

17
9. Connect input conductors to line (wall) disconnect.
10. Replace side panel. Replace only if all connections have made.
Output connections require this panel to be removed.
11. Connect the other end of work cable to workpiece or cutting table.
Connection must be made to a clean, exposed metal surface, free of
paint, rust, mill scale, etc.
Electric Current Is Hazardous.
It is important to have a good earth ground connected to the
workpiece or cutting table.
WARNING
Work ground to work piece
Work ground to cutting table
SECTION 3 INSTALLATION