ESAB EPP-200, Instruction Manual

Page: 14 / 52

14
WARNING
CAUTION
CAUTION
Do Not Restrict Air Flow
Restricting intake air with any type of fi lter on or around the Plasma
console will result in overheating and may void the warranty.
3.3 Placement
t "NJOJNVNPGGU NDMFBSBODFGPSDPPMJOHBJSøPX
t 1MBOGPSUPQQBOFMBOETJEFQBOFMTIBWJOHUPCFSFNPWFE
for maintenance, cleaning and inspection.
t -PDBUFUIF&11SFMBUJWFMZDMPTFUPBQSPQFSMZGVTFE
electrical power supply.
t ,FFQBSFBCFOFBUIQPXFSTPVSDFDMFBSGPSDPPMJOHBJS
fl ow.
t &OWJSPONFOUTIPVMECFSFMBUJWFMZGSFFPGEVTUGVNFTBOE
excessive heat. These factors will a ff ect cooling
e ffi ciency.
Conductive Dust And Dirt Inside Power Source May
Cause Arc Flash Over
Equipment damage may occur. Electrical shorting may occur if
dust is allowed to buildup inside power source. See maintenance
section.
Electric Shock Can Kill!
Provide maximum protection against electrical shock.
Before any connections are made inside the machine, open the
line wall disconnect switch to turn power o ff .
3.4 Input Connections to Console
Plasma
Console
SECTION 3 INSTALLATION