ESAB EMP 215ic, Service Manual

Page: 79 / 102

ESAB EMS215IC/EMP215IC
Manual 0463 413 001 ROUTINE MAINTENANCE 7-1
7 MAINTENANCE
NOTE!
Regular maintenance is important for safe, reliable operation
!
CAUTION
Only persons with the appropriate electrical knowledge (authorized personnel) may
remove the cover of the product to connect or carry out service, maintenance or repair
work on the welding equipment.
!
CAUTION
The product is covered by manufacturer’s warranty. Any attempt to carry out repair work
by non-authorized service centers will invalidate the warranty.
WARNING
Disconnect power before performing maintenance!
NOTE!
Perform maintenance more often during severe dusty conditions.
Before each use - make sure that:
• The torch body and torch cable and leads are not damaged.
• The contact tip on the torch is not damaged.
• The nozzle on the torch is clean and does not contain any debris.
7.01 Routine Maintenance
Maintenance schedule during normal conditions.
Interval Area to maintain
Every 3 month
Clean or replace
unreadable labels.
Clean weld
terminals.
Check or replace weld cables.
Every 6 month
Clean inside
equipment.