ESAB CUTMASTER A40, Operating Manual

Page: 3 / 112

!
WARNING
Read and understand this entire Manual and your employer’s safety practices before install-
ing, operating, or servicing the equipment.
While the information contained in this Manual represents the Manufacturer's best judgement,
the Manufacturer assumes no liability for its use.
Plasma Cutting Power Supply
Cutmaster
®
A60
SL100 ™ SV Automated Torch
Operating Manual Number 0-5428
Published by:
ESAB Group Inc.
2800 Airport Rd.
Denton, TX 76208
(940) 566-2000
www.esab.eu
Copyright 2015 by ESAB
All rights reserved.
Reproduction of this work, in whole or in part, without written permission of the publisher
is prohibited.
The publisher does not assume and hereby disclaims any liability to any party for any loss
or damage caused by any error or omission in this Manual, whether such error results from
negligence, accident, or any other cause.
For Printing Material Specification refer to document 47x1909
Original Publication Date: August 30, 2015
Revision Date:
Record the following information for Warranty purposes:
Where Purchased:_______________________________ ____________
Purchase Date:__________________________________ ____________
Power Supply Serial #:___________________________ _____________
Torch Serial #:___________________________________ ___________
i