General information
ENIP-2, manual, ENIP.411187.002. Rev. 11.2020
6
1
General information
ENIP-2 measures the full set of three-phase electrical grid parameters
. It includes RMS of
waveform combinations as well as the 1
st
harmonic parameters, e.g., effective voltage and
current (each phase and line to line), active, reactive and apparent power (each phase and
total), active and reactive energy import and export, power quality parameters. Digital
input-output and programmable logic functionality enables it to play major role in auto-
mation systems. ENIP-2 is able to exchange data via RS-485 (Modbus and IEC 60870-5-
101 protocols) communication port or Ethernet (Modbus, IEC 60870-5-104 and IEC-
61850 as an add-on option).
ENIP-2 is designed for use in SCADA and supervisory control centers of substations, power
stations, ships, industrial mills, oil and gas production. It can transmit data directly to
higher level of controlling system or through remote terminal unit (RTU), e.g., EN
С
S-3m,
EN
С
M-3.
High performance, high-quality signal processing and the possibility of synchronous
measurements of electrical grid parameters make ENIP-2 unique. High-quality measure-
ments are achieved by using our own advanced signal processing algorithms. Moreover,
ENIP-2 optionally supports IEC 61850 (MMS-server, GOOSE subscriber/publisher) and can
serve as a basic control unit for digital substation.
ENIP-2 configuration is supposed to be defined
by «
ES Configurator
»
software (
). It
allows to set required parameters for available interfaces and protocols and defining I/O
configuration. For more information, see chapter 6.
ENIP-2 is multifunctional, repairable, restorable device. It is designed for continuous op-
eration in industrial installations.
Manufacturer
Engineering Center "Energoservice"
26 Kotlasskaya St., 163046 Arkhangelsk, RUSSIA
tel.: +7(8182)64-60-00, +7(8182)65-75-65; fax: +7(8182)23-69-55
Electromagnetic compatibility certificate
№
E032/02
Directive 2011/65EUof the European Parliament and of the Council
of 8 June 2011 on the restriction of the use of certain hazardous
substances in electrical and electronic equipment.
EN 61010-1:2010, EN 61000-4-3, EN 61000-4-4, EN 61000-4-5, 61000-
4-6, 61000-4-8, 61000-4-11.
