Notices
Safety compliance
The printer can be only used with the power adapters supplied by this company, or
the product maybe damaged, with a risk of fire. To avoid burning, or model
deformation, do not touch the model. Nozzle, or the platform by hand, or any other
part of the body, while the printer is working or immediately after it has finished
printing.
There is a slight smell from ABS when it is being extruded. The smell is, however, not
too unpleasant. Operation in a well-ventilated room but draught free. Draughts can
affect warping of ABS prints. When ABS is burnt is release toxic fumes.
Always have adult supervision when Children are present. Please keep small printed
parts away from young children, choking hazards! There are several safety issues,
small tools and HOT objects and most parts used in connection with the 3D printer.
Tie back long hair and loose clothing.
Check the power input of power supply unit. You can choose either 110V or 220V
according to the Power regulation in your country.
Protection
The printer must not be exposed to water or rain, or damage may occur.
Do not pull out the USB cable when loading a digital model, or the model data
maybe lost.
When using the Extruder function, keep at least 50mm between the nozzle and the
platform. If too close, the nozzle may get blocked.
The printer is designed to work properly at an ambient temperature between 15
℃
and 30
℃
and humidity of between 20% and 50%; Operating outside those limits may
result in low quality models.
Legal
Eryone makes no warranty of any kind with regard to this material, including, but not
limited to, the implied warrants of merchantability and fitness for a particular purpose.
Eryone should not be liable for errors contained herein or for incidental or
consequential damages in connection with the furnishing, performance, or use of this
material. Changes or modifications to the system not expressly approved by Eryone,
the party responsible for
3
