Eryone Thinker S User Manual Download Page 2

Page: 2 / 24

Table of contents

Notices · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · 4

1. Overview of Eryone Thinker S · · · · · · · · · · · · · · · · · · · · · · · · · 5

1.1 A glance of Thinker S · · · · · · · · · · · · · · · · · · · · · · · · · · · · · 5

2. Specifications · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · 6

3. Printer assembly · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · 7

4. First steps

· · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · 7

4.1Test before print · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · 7

-Movement test · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · 7

-Preheat hotend and heated bed · · · · · · · · · · · · · · · · · · · · · ·7

-Load the filament · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · 8

4.2 Levelling the 3d printer on manual· · · · · · · · · · · · · · · · · · · · · · · 9

4.2.1 Levelling gantry frame· · · · · · · · · · · · · · · · · · · · · · · · · · · · 9

4.2.2 Levelling the heated bed · · · · · · · · · · · · · · · · · · · · · · · · · ·10

5. Printing · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · 11

5.1 Install the driver · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · 11

5.2 Setting your 3d printer · · · · · · · · · · · · · · · · · · · · · · · · · · · · 12

5.3 Load printing model · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · 15

5.4 Slice the model · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · 15

5.5 Printing via SD card

· · · · · · · · · · · · · · · · · · · · · · · · · · · · 16

6. LCD layout · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · 17

7. Special function of Eryone Thinker S · · · · · · · · · · · · · · · · · · · · ·19

7.1 Magnetic and flexible printing surface · · · · · · · · · · · · · · · · · ·19

7.2 Super quiet · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · 19

7.3 Assembly finished within 10/20 minutes · · · · · · · · · · · · · · · · 19

Summary of Contents for Thinker S

























Search results

Summary of Contents for Thinker S

Reviews:

Related manuals for Thinker S

Brands by name

Popular brands

Eryone Thinker S, User Manual

Search results

Summary of Contents for Thinker S

Reviews:

Related manuals for Thinker S

Brands by name

Popular brands