Eryone Thinker S User Manual Download Page 3

Page: 3 / 24

7.4 Large volume and high quality · · · · · · · · · · · · · · · · · · · · · · ·19

7.5 Power failure protection · · · · · · · · · · · · · · · · · · · · · · · · · · · 20

7.6 Compatible with auto-leveling sensors · · · · · · · · · · · · · · · · · 20

8. FAQ-Common assembly issues · · · · · · · · · · · · · · · · · · · · · · · · 20

8.1 X carriage is loosen · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · 20

8.2 Z axis stop moving or stick half way· · · · · · · · · · · · · · · · · · · 20

9. FAQ-Print problem · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · ·21

9.1 Filament can

’

t stick to the heated bed · · · · · · · · · · · · · · · · · 21

9.2 Extruder under extrusion · · · · · · · · · · · · · · · · · · · · · · · · · · ·21

10.FAQ-Error messages · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · 21

10.1 Mintemp error · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · 21

10.2 Maxtemp error · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · 22

10.3 Thermal runaway · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · 22

Summary of Contents for Thinker S

























Search results

Summary of Contents for Thinker S

Reviews:

Related manuals for Thinker S

Brands by name

Popular brands

Eryone Thinker S, User Manual

Search results

Summary of Contents for Thinker S

Reviews:

Related manuals for Thinker S

Brands by name

Popular brands