ERT SpiroSphere Instructions For Use Manual Download Page 6

Page: 6 / 136

SpiroSphere

ECG Instructions for Use

Page 6/136

Version 02.02 • 04AUG2022

Declaration of Conformity

Notes on Safety in this Instruction Manual

Following the ANSI (American National Standards Institute) recommendations for safety notes,
speci c passages of this instruction manual are clearly marked as safety notes.

Degree of
Danger

Meaning of Indicator

Injury
to
persons

Damages
to
property

(X)

DANGER

indicates an immediate hazardous

situation, which, if not avoided, may result in
serious injury or death. Limited to extremely
dangerous situations.

WARNING

indicates a potential hazardous

situation, which, if not avoided, may result in
serious injury or death.

Caution

indicates a potential hazardous situation,

which, if not avoided, may result in minor or slight
injury. Also used to indicate precarious procedures.

Additional icons used in this manual:

Important information on operation and other
useful information. Does not warn of dangerous or
harmful situations.

Tips, general information and information on
operation.

The original Declaration of Conformity document can be obtained from ERT.

Summary of Contents for SpiroSphere









































































































































Search results

Summary of Contents for SpiroSphere

Reviews:

ERT SpiroSphere, Instructions For Use Manual, Page: 6 / 136

Search results

Summary of Contents for SpiroSphere

Reviews: